Some maintenance methods of air compressor
This article mainly summarizes some maintenance methods of air compressors. I hope that through the following overview, you can have a deeper understanding of the maintenance methods of air compressors.
Air compressor overview:
The working pressure of the air source should be about 20% higher than the maximum working pressure in the pneumatic system, because the loss along the way and the local loss of the air supply pipeline should be considered. If the working pressure requirement is lower in some parts of the system, a pressure reducing valve can be used to supply air. The rated discharge pressure of the air compressor is divided into low pressure (0.7~1.0MPa), medium pressure (1.0~10MPa), high pressure (10~100MPa) and ultra-high pressure (above 100MPa), which can be selected according to actual needs. Common use pressure is generally 0.7-1.25.
Some maintenance methods for air compressors?
Answer: In order to ensure the normal operation of the compressor and prolong the service life, in addition to regular maintenance and inspection, daily maintenance and inspection are very important.
In addition to using various instruments to detect the operation changes of the compressor, it is usually checked by looking, listening and touching. But these three methods are not isolated, but related to each other, and one method alone cannot check the quality of compressor operation.
Look--by looking, you can see whether the parts of each transmission part are loose, whether the lubrication of each friction part is good; whether the cooling efficiency of the cylinder cooling water and the intercooler at all levels is good, and whether the flow of cooling water is smooth ;Whether the cylinders and coolers at all levels are empty; whether there is air leakage and oil leakage at each connection;
