Mini Table Saw

Depende del tamaño del disco de tu pulidora. Yo tengo una pulidora con disco de 4" y puedo cortar un tubo de hasta 2.5 pulgadas de diametro.

No this stand will NOT WORK with a small tool like a Dremel . Dremel sell their own stand assembly for this purpose.

Does this come with adjustment/tightening wrenches, wheel mandrels, and other accessories besides the ones listed in the description?

Dear customer, for this bench grinder, yes the flex shaft can be attached on the left side for left-handed users.

hat are you using for a mill? What is your desired level of precision? There is a good bit of flex in this that really can’t be overcome so your cut will vary widely by 10 to 20 thousandths or more.

Choosing a smaller saw also brings the benefit of saving money,and this 4″ mini electric table saw with 2 blades is one of the most inexpensive options currently on the market.

Don't know the question about metric or otherwise. You could use a little longer screws on the outer holes (holding the larger objects). You have about 3/4" clearance.

This is from base to clamping area where drill is secured onto the press. This can vary depending upon the length of the drill motor shaft and overall length of the drill chuck and any object...

This is just a light weight table with no electric motor. You can use any thing you want. My opinion:”Anything larger than a Dremel tool you are pushing your luck”.

Depends on what your doing its a light crossslide if working in plastic r light aluminum perhaps i modified it to make a excentric chuck for my rose engine on which i primarily work wood.