Mini Table Drill

Voltage 220V Frequency 50/60HZ Input power 800W No-Load Speed 2500r/min Drill clamping diameter 1.5-13mm Max spindle travel 90mm Qty 2pcs Outside carton size 35*24*70.5cm N.W./G.W. 18.5/23.1KG

Voltage,Frequency :220V,50/60HZ Input power :880w No-Load Speed :0-2500r/min Max spindle travel :60mm Qty :2pcs Outside carton size :44.5*31.5*61CM Inner box size 30.5*21.5*59CM N.W./G.W. : 22/24.5KG

Voltage,Frequency :220V,50/60HZ Input power :1050w No-Load Speed :0-800r/min Max spindle travel :60mm Qty :2pcs Outside carton size :44.5*31.5*61CM Inner box size: 30.5*21.5*59CM N.W./G.W. :25/26.5KG

* Speed display * Four-speed control * Constant power & speed * Dual-powered (AC and lithium battery) * Battery not included

Dear customer, for this bench grinder, yes the flex shaft can be attached on the left side for left-handed users.

Which polymer? What are you using for a mill? What is your desired level of precision? There is a good bit of flex in this that really can’t be overcome so your cut will vary widely by 10 to 20...

I saw no mention of warranty when purchased, However AMAZON return policy may be able to help when quality is an issue.

Don't know the question about metric or otherwise. You could use a little longer screws on the outer holes (holding the larger objects). You have about 3/4" clearance.

This mini bench drill press is widely used in circuit board, craft drill, document binding,teaching experiment, model making, plastic products,drill in the rubber, glass, plexiglass and metal.

This is just a light weight table with no electric motor. You can use any thing you want. My opinion:”Anything larger than a Dremel tool you are pushing your luck”.

The product is widely used in circuit board, craft drill, document binding,teaching experiment, model making, plastic products,drill in the rubber, glass, plexiglass and within 1cm thickness of...