Air compressor failure reasons and solutions
This article mainly outlines the causes and solutions of air compressor failures. There are often reasons for air compressor failures. Here you need to quickly find the cause of your factory air compressor failure. The fastest Reduce the loss of your own factory, please see for details.
1. Troubleshooting and troubleshooting
1. The compressor is not loaded
a. The pressure on the gas pipeline exceeds the rated load pressure, and the pressure regulator is disconnected. No need to take measures. When the pressure on the gas pipeline is lower than the loading (position) pressure of the pressure regulator, the compressor will automatically load.
b. The solenoid valve is out of order. Remove it for inspection and replace it if necessary.
c. There is leakage on the control pipeline between the oil and gas separator and the unloading valve
Check the pipes and connections, and repair if there is any leakage.
2. Compressor overtemperature a. No oil or oil level is too low Check, add oil if necessary, but do not allow too much oil.
b. The oil filter is blocked. Replace the oil filter.
c. The oil cut-off valve fails and the spool is stuck. Remove it for inspection.
d. The oil and gas separator filter element is blocked or the resistance is too large
