7pcs Airbrush Hose Adaptor Fitting Set（AB-A1234567）

7 pcs Airbrush Hose Adaptor Fitting Set AB-A1234567

7 pcs of adapter fitting

1. 1/4" Male to 1/8" Male BSP Standard.

2. 1/4" Male to 1/4" Male BSP Standard.

3. 1/8" Male to 1/8" Male BSP Standard.

4. 1/8" Male to 1/4" Female BSP Standard.

5. 1/4" Female to 1/8" Male BSP STandard.

6. 1/4" Female to M5*0.5 Male.

7. 1/8" Male to M5*0.5 Female.

FAQ

1.Question: Will this work on a Iwata neo?

Answer: Yes it should

2.Question: What is the max working pressure?

Answer: I don't know but you wont ever turn it up high enough to burst it using an air brush on a regulator. Ive used it on the canned air as well as on an airbrush compressor with no issues. I briefly ran it off my home compressor with the factory regulator set at the max psi for the airbrush with no issues as well. Just follow manufacturers specs for the regulator settings for your airbrush and you should be good.... I believe the common setting is 30 psi max if I remember correctly ? The airbrush compressors will shut off at about 57psi so I assume the hose will at least handle that pressure but you will never use that amount of pressure for the airbrush itself. If you are using this hose for any other purpose ask the manufacturer directly for specifics

3.Question: What do i need to connect to a standard air compressor? please be as specific as possible. many thanks

Answer: You'll need a regulator if the compressor doesn't have one. If it does, and it will regulate the air pressure down to 20-30 lbs, then all you need is the adaptor and connector. Any good hardware or big box home improvement tool will have what you need. Best thing would be to take the hose with you to verify the size you'll need.

Hot Tags: 7pcs airbrush hose adaptor fitting set（ab-a1234567）, China, suppliers, manufacturers, factory