Self Adhesive Sandpaper #400–#2000 – 7 Grits, 20x80mm Pre-Cut, Wet/Dry (HSP-400/600/800/1000/1200/1500/2000)
Fine progressions remove scratches left by coarser grits without eating into plastic, resin, or clear coats, finishing models, 3D prints, and painted work smoothly. Note: sanding boards are not included and must be purchased separately.
FAQ
1. Question:How many sheets are there?
Answer: One for each grit—#400, #600, #800, #1000, #1200, #1500, and #2000—with 16 pre-cut 20 x 80 mm sheets per box. Each sheet has a peel-off adhesive backing, ready to stick onto a sanding board or use by hand. Please note the sanding boards shown in the images are not included and need to be purchased separately.
2. Question: How does the adhesive backing perform over a full sanding session?
Answer: The premium pressure-sensitive adhesive bonds firmly to sanding boards, flat blocks, and gently curved surfaces, and it will not curl, peel, or lift mid-stroke—so the full sheet face stays engaged and your pressure stays even. When the sheet is worn, it peels off cleanly without leaving residue on the board, ready for the next sheet.
3. Question: How do I clean and reuse the sheets?
Answer: Two ways, as shown in the images: scrub the face with a stiff brush to dislodge debris, or rinse it under running water for a deeper clean. Washing restores most of the cutting force, and because the sheets work wet or dry, using them with water also gives a smoother finish and far less dust. Between the washable abrasive and the 16-sheet supply per grit, one box outlasts a lot of ordinary sandpaper.
