0.2mm Folding Saw Blades, 4 Shapes, 304 Stainless – Handle Not Included (MS-008)

Made of extra-hard 304 stainless steel with dense fine teeth, they slice through model parts so cleanly that gates and seams show barely any wear and tear afterward.

Each blade ships flat and folds along its scored line before mounting, keeping the steel ultra-thin yet stiff so it will not bend under cutting pressure. You get 4 shapes about 60 mm long—bent, square, arc, and tip—covering curved armor, flush panel cuts, rounded contours, and tight corners.

This listing is for the blades only: they fit the wine-red precision saw handle shown in the images (sold separately). Fold along the line, insert into the slot, and screw tight; glue fixing is recommended. Avoid metal and hardwood to protect the teeth.

FAQ

1. Question: Why do the blades arrive flat, and is that normal?

Answer: Yes, it is the folded-blade design. Each blade is stamped flat with a scored fold line; bending it along that line before installation gives the ultra-thin 0.2 mm steel a reinforced cross-section, so it stays stiff under cutting pressure instead of flexing or wandering. Fold, insert into the handle slot, and screw tight—glue fixing is recommended to lock it for good.

2. Question: What are the four shapes for?

Answer: Each shape targets a different geometry: the bent blade reaches around curved armor parts, the square blade runs straight flush cuts along panel lines, the arc blade follows rounded contours, and the tip blade starts cuts in tight corners. All are about 60 mm long, so together they cover nearly every cutting situation on a model kit.

3. Question: What materials can I cut, and what should I avoid?

Answer: The blades are made for model parts—PS and ABS plastic, resin, and soft wood strips—suitable for both novices and skilled builders. Avoid metal and hardwood: harder materials will damage the fine teeth and can cause the blade to slip or break. The blades are sharp, so please handle them carefully and keep them away from children.