Professional 0.3 mm Dual-Action Gravity Airbrush Kit – 7/20/40 cc Interchangeable Cups – 15–50 PSI Spray Pen (AB-1310K)

Three interchangeable gravity-feed cups cover every job size: 7 cc for detail work and small batches, 20 cc for mid-size projects, and 40 cc for long base-coating sessions without constant refills. Each cup lifts off in seconds for fast color changes and easy cleaning.

The wide 15–50 PSI working range runs from low-pressure detail spraying on a compact compressor to high-flow coverage on a tank unit. Precision-machined internals resist clogging and tip dry, holding spray accuracy over thousands of cycles.

FAQ

1. Question: What air pressure should I use, and which compressor works with it?

Answer: The airbrush runs from 15–50 PSI. Around 20–25 PSI is the sweet spot for most acrylics and lacquers, while lower pressures favor fine detail and higher pressures push broader coverage. It works with standard oil-free diaphragm compressors as well as larger tank-equipped units, with no special regulator required for typical hobby use.

2. Question: What is included in the package, and how large is it?

Answer: The kit ships in a 24 × 18 × 4 cm box weighing 480 g, containing the airbrush body and its three interchangeable cups (7 cc, 20 cc, and 40 cc). The compact package makes it easy to store between sessions or carry to group builds and workshops.

3. Question: How does the dual-action trigger work?

Answer: One finger controls everything. Press down to release air, then pull back to draw the needle and release paint. Pulling further widens the spray and increases volume; easing forward narrows it back to a fine line. Since both actions are continuous, you can fade, shade, and adjust line width without pausing to turn a knob.