●Model: G100

●Specification: 100g/KIT (A ingredient 50g, B ingredient 50g).

●Feature:

●Working time: 40-60 minutes. It takes around 2 hours for surface dry (Shelflife time), and get harden around 6 hours.

Colors available: ■gray ■white ■carnation ■darkgray ■black ■red ■blue ■yellow

FAQ

1.Question:

Can this product be bent to fit curved nosurfaces after it is moulded in a silicone mold?

Answer:

Yes, the material is very playable and would comply with a silicone mold. If your plan is to place a ball into a mold and press the material into shape of the mold and allow for excess material to flow through a gate that would work.

However if your plan to to place small amounts of material at incremental times it might be a challenge since the material was designed to adhere to wood not silicone.

In some cases I have used 0.02" aluminum sheet as a form and pressed the material into a void with the aluminum used as a material stop.

Once the material has dried I have separated the aluminum from the material.

For texture after the material has stated to set have pressed a rough sawn wood sample into the material to leave a texture,

In "some" cases once you pull even amounts of Part's A and B and mix the material is sometimes sticky.

The "stickiness" can be decreased prior to application if you allow it to air dry "temperature dependent" for a few 5-10 minutes - again "temperature dependent" (higher the ambient temperature the faster the material sets).

So yes the material can be molded using a silicone mold.

2.Question:

can i use this product to fix wood siding? the wood siding on our house has cracks and I would like to fill the cracks with this product.

Answer:

I found that it was the BEST product to fill in areas on my siding. I tried Bondo but it is so sticky and set up too quickly. This stuff is my favorite. I picked out small areas of dry rot then applied wood hardener. I came back later and used this SculpWood and it worked perfectly. It dries hard as rock. I am about to have my house painted, the contractor was impressed by my efforts (I am a 65 yr. old female with no experience)....He said that he will place some sealant over it to make sure that it does not show cracks later on.

Hot Tags: ab epoxy putty 100g per kit（g100）, China, suppliers, manufacturers, factory