Battery Operatedd Airbrush Compressor with Aluminum Airbrush Kit(AC16RTJ30A)

Short Description:

Even though it might sound like a simple cleaning solution, doing so will actually damage the more sensitive parts of the tool....


Product Detail

Product Tags

Airbrush Kit with Compressor, Portable Cordless Air Brush Gun Set for Painting 30PSI Gravity Feed Dual Action Mini Handheld Airbrush w/ 0.3mm Tip for Model, Nail, Tattoo, Cake Decorating, Rechargeable


●Cordless Airbrush Kit with Compressor: Without tangled cables! You can use this mini air brush almost anywhere. The rechargeable battery allows to work continuously 60+ mins and supports charging with the USB socket, such as power bank, adapter, laptop, and power strip. Note: It is recommended to use a 5V/1A or 5V/2A adapter, please don't use the adapter exceed 5V 2A.

●3 Air Pressures Up to 30 PSI: The higher pressure is capable of delivering a heavier coating more rapidly over a wide area. This airbrush gun has 3 air pressures(18psi, 25psi, and 30psi). Ideal for painting models, crafts, cake decorating, auto graphics, temporary tattoos, fine art, nail art, and more!

●Greater Control: It is a special "dual action airbrush", which is different from the traditional double action airbrush. You can turn on and adjust different air pressures by pressing the on/off button. Then you can adjust the amount of paint by sliding back on the trigger. The internal mix offers the most consistent, smooth result because the atomization of the paint is better with this method. This gives you a well-balanced distribution of paint, which will allow for greater control.

●0.3mm Fluid Tip: This gravity feed airbrush with 0.3mm needle and nozzle combination allows for finer control of paint flow and less overspray, which increases your ability to produce detailed work and doesn't waste a lot of paint. It supports spraying any properly reduced paint or airbrush-ready media.


How to clean:

1. Add water, alcohol or cleaning fluid to the fluid cup and spray it.

2. Try back flushing. Cover the nozzle with finger or a paper towel and press down slightly on the trigger. This helps clean the narrow chamber around the needle.

Please Note:

1. Please test the airbrush with water before use to make sure the airbrush is not clogged.

2. When finishing the spraying work or have to stop for more than 10 minutes, please use the cleaning brush to clean the airbrush cavity, nozzle, and fluid cup thoroughly in time.

3. After 30 minutes of continuous use, the air compressor should be turned off for a few minutes to cool down.

4. Don't soak your airbrush. Even though it might sound like a simple cleaning solution, doing so will actually damage the more sensitive parts of the tool.

5. Please use water-based makeup foundations instead of oil-based makeup foundations, you need to use makeup foundations made for airbrushes otherwise it will clog the nozzle.

6. Please do not use the airbrush when charging.

7. If the trigger starts to feel sticky, use one of the special lubricants that are specifically designed for airbrushes.

8. If the airbrush can't spray liquid, it may be because the fluid control knob is too tight or the nozzle is blocked. Please try to adjust the fluid control knob or clean the nozzle with alcohol or detergent.


FAQ

1.Question: 1 inch male compressor adptor

Answer: If you are looking for a 1 inch, there is not any thing that big with this 7 PCs kit.


2.Question: Does this included 1/4" male 1/8" female adapter to go from iwata neo hose to gundam marker airbrush system which has a 1/8" male connector on it.

Answer: Yes.This can meet your needs.


3.Question: Are these magnetic ? As in will a magnet stick to them - not will they stick to metal.

Answer: Yes steel is magnetic


Hot Tags: battery operatedd airbrush compressor with aluminum airbrush kit(ac16rtj30a), China, suppliers, manufacturers, factory

Leave Your Message


Write your message here and send it to us

Leave Your Message