2 Cups Gravity Dual-Action Airbrush Spray Gun Trigger (AB-116K)

2 Cups Gravity Dual-Action Airbrush Spray Gun Trigger (AB-116K)

Short Description:

 Product Name:  Airbrush Kit Model: AB-116K Specification:  Fixed Dual-Action Trigger Air/Fluid Control Internal Mix Fully Atomized Spray Pattern 2 Screw on Cup Sizes: 7cc, 10cc. 0.3, 0.5mm Needles & Nozzles 1.8M braid air hose Adaptor: G1/8” male -G1/4” female Nozzle spaner Package: Carton Dimension: 50x38x31 CM PCS/CTN: 20 N.W./G.W.: 16/18 KG Used for:  Airbrush makeup, Airbrush tattoo, Airbrush tanning, Finger nail art, Automotive, Cake, Hobby     How to clean the airbrus...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Shenzhen
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

     Product Name:  Airbrush Kit

    Model: AB-116K

    Specification: 
    Fixed Dual-Action Trigger Air/Fluid Control Internal Mix Fully Atomized Spray Pattern 2 Screw on Cup
    Sizes: 7cc, 10cc. 0.3, 0.5mm Needles & Nozzles
    1.8M braid air hose
    Adaptor: G1/8” male -G1/4” female Nozzle spaner

    Package:
    Carton Dimension: 50x38x31 CM
    PCS/CTN: 20
    N.W./G.W.: 16/18 KG

    Used for:  Airbrush makeup, Airbrush tattoo, Airbrush tanning, Finger nail art, Automotive, Cake, Hobby

     

    QQ图片20190222160417

     

    How to clean the airbrush:

    Setp1:
    After spraying your project and your ready to clean the paint from the Airbrush, or you are just ready for a color change, discard the paint from the color cup with a squeeze bottle and use a cleaning brush to clean the color cup immediately. Remember to never let any paint dry or sit in the Airbrush as this will cause a world of problems for you.

    TIM截图20190411150850

     

    Step2:
    Now, using a bucket of fresh water (the bucket is to minimize over-spray in the air), submerge the Airbrush underwater and perform the “flush and back-flush” steps. This is where you allow clean water to run through the Airbrush and then allowing water to back-flush any pigment inside of it. This is achieved by “plugging” and “un-plugging” the tip (needle cap) of the brush with your finger. Do this 10-20 times underwater or until clean.

    TIM截图20190411150850

     

    Step3:
    Note: Although the color cup and airbrush visibly appear to be clean, there may still be pigment inside the body of the brush AND on the needle. Remove the needle by loosening the needle chuck and wipe the needle clean. While the needle is out, you can flush and back-flush the Airbrush through fresh water to insure it is 100% clean. Now you can gently replace the needle. (be very soft handed and be careful replacing the needle as to avoid damaging the fluid nozzle.)

    TIM截图20190411150850

     

    Step4:
    Airbrush cleaner can now be added to the brush to eat away any stubborn paint still inside the brush. (If you are using auto paint, use reducer as your cleaner). Flush and back-flush a few times and spray out the cleaner to get a visual spray test. If a sputtering or spitting pattern comes out, your brush is still dirty and you will need to repeat steps 1-4.

    TIM截图20190411150850


  • Previous:
  • Next:

  • Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !